点击放大查看
8975590000
| Manufacturer | |
| Description | CURRENT MONITORING |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Package | 1 | ||
Compliance
| RoHS | Lead free / RoHS Compliant | Safety Category | DEMKO07ATEX143595X |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Current | max. 100 µA | Frequency | 50...60 Hz |
| Indicator | LED ON: OK; FLASHING: signal out of range;LED OFF: Error | Range deg/s | 0.5 mm² |
| Load Current | ≤ 600 Ω | Output Signal | Approx. 24 mA |
| Current - Output | 4...20 mA (current loop) | Number of Inputs | 1 |
| Number of Outputs | 1 | Current - Input Bias | 0...1 A AC/ 0...5 A AC/ 0...10 A AC |
Mechanical
| Depth | 112.4 mm | Width | 22.5 mm |
| Length | 72 mm | Weight | 101 g |
| Connector Type | Screw connection | Depth (Inches) | 4.425 inch |
| Width (Inches) | 0.886 inch | Length (Inches) | 2.835 inch |
| Package Quantity | instruction sheet.pdf | ||
Product Info
| Type | WAS1 CMA LP 1/5/10A EX | Series | * |
| GTIN (EAN) | 4050118023640 | Description | Cross-connectors for power supplies and markers – refer to Accessories |
| Specifications | Monitoring component for AC currents up to 10A with 4...20 mAloop feed and electrical isolationCurrent monitoring component in 22.5 mm width for recording 50/ 60 HzAC currents 0...1 A / 0...5 A / 0...10 A. Input range can be selected using DIP switches.Power is fed to the component via the 4...20 mA current loop on the output side.The input and output circuits have 6 kV of electrical isolation.Approved for ATEX Zone2 and UL C1 D2 applications.Add-on housing for TS35 rail mountingDimensions: L/W/H 72/ 22.5/ 92.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0...1 A / 0...5 A / 0...10 A AC switchable 50 / 60 HzVoltage of measuring circuit 250 V ACOutput 4...20 mA current loopLoad resistance < 600 Ohm Strom>1 kOhm / voltageTransmission error < 0,5% v. E. Temperature coefficient 200 ppm / KStep response time typ. 700 msAuxiliary power via output-side current loopAmbient temperature range 0 °C...+50 °C Secure isolation EN 50178, 2-way isolation up to 6 kVTest voltage 4 kV input against outputRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX C1D2, ATEX Zone 2Type WAS1 CMA LP 1/5/10A EX | Firmware Version | WAVESERIES, Current monitoring, 0...1 A AC/ 0...5 A AC/ 0...10 A AC, 1, 1, Screw connection |
Environmental
| Ingress Protection | 27-21-01-07 | Operating Temperature | 0 °C...50 °C |