点击放大查看
8965460000
| Manufacturer | |
| Description | SIGNAL CONVERTER/DISCONNECTOR Weidmuller ACT20X 模拟到模拟 信号调节器, IECEx 认证, 模拟输入, USB 电缆接口, 19.2 → 31.2 V 电源电压 |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Package | 1 | ||
Compliance
| RoHS | Lead free / RoHS Compliant | IEC 61000-4-2 | DIN EN 61326, NE 21 |
| Qualification | 11ATEX0164X.pdf | Approval Agency | CE，cUL，EAC，Ex，GOSTEX，RoHS，TUV |
| Safety Category | SIL 2 | Standard Number | 30-21-18-01 |
| Protection Features | IP20 | Declaration of Conformity | Declaration of Conformity |
Electrical
| Sensor | HART 信号协议 | Current | 93 mA |
| Voltage | 28 V DC | Accuracy | < 0.1% span |
| Frequency | 27-21-01-07 | Tolerance | 5 Years |
| Input Type | 模拟 | Input Range | 4 → 20 mA |
| Output Type | 模拟 | Power - Max | < 650 mW |
| Range deg/s | 0.5 mm² | Current - UL | E337701.pdf |
| Load Current | ≤ 725 Ω | Current - IEC | IECEx certification |
| Output Signal | < 1 mA | Power - Rated | ≤ 62.5 VA / 32 W (safe area)≤ 16 VA / 32 W (Zone 2) |
| Response Time | ≤ 5 ms | Current - Test | ≤ 0.5 A AC / 0.3 A DC (safe zone), ≤ 0.5 A AC / 1 A DC ( Zone 2) |
| Regulator Type | 模拟到模拟 | Voltage Rating | 300 V |
| Current - Output | 4…20 mA (max. 23 mA) | Voltage - Supply | > 14.5 V @ 20 mA |
| Switching Voltage | ≤ 125 V AC / 110 V DC (safe area)≤ 32 V AC / 32 V DC (Zone 2) | Number of Channels | 2 |
| Resistance - Input | ≤ 0.01% of span / 100 Ω | Voltage - Breakdown | 2.6 kV (input / output) |
| Current - Input Bias | 4…20mA | Frequency - Output 3 | 0.5…2.5 kHz @ 3.5…23 mA bi-directional HART® signal |
| Power - Average Forward | ≤ 3 W (2 channels) | VoP, Velocity of Propagation | 4.8 x 10-8 h-1 |
| Ripple Current @ Low Frequency | < 7.5 mVeff | ||
Mechanical
| Depth | 113.6 mm | Taper | SIL certificate |
| Width | 22.5 mm | Height | 117.2 mm |
| Weight | 212 g | Termination | 螺钉 |
| Torque - Min | 0.4 Nm | Mounting Type | DIN 导轨 |
| Connector Type | Screw connection, Removable terminal block | Depth (Inches) | 4.472 inch |
| Width (Inches) | 0.886 inch | Connector Usage | USB 电缆 |
| Height (Inches) | 4.614 inch | Package Quantity | instruction sheet.pdf |
| Torque - Max Momentary (oz-in / mNm) | 0.6 Nm | ||
Product Info
| Type | Relay, 1 NC (voltage-free) | Series | * |
| ETIM 6*0 | EC002479 | Features | 集成警报触点在发生故障时发出警报 |
| Software | WI-Manager + DTM-Library for online installation | GTIN (EAN) | 4032248785070 |
| Configuration | With FDT/DTM software | Legend (Text) | CBX200 USB configuration adapter - 8978580000 |
| Specifications | Ex output isolation amplifier for standard DC current signals, 2-channel, HART transparent2-channel output isolation amplifier in 22.5 mm width with external power supply,for transmitting and isolating standard signals 4 to 20 mA from the safe zone to Ex zones 0,1,2. Status-/ error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.Add-on housing for TS35 rail mountingDimensions: L/W/H 119.2/ 22.5/ 113.6Screw connection/ Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 2 x 4...20 mA Output 2 x 4...20 mALoad < 600 Ohm KanalAccuracy < 0,1 % v.ETemperature coefficient < 0,01% v.E./°C (Tu) Alarm output relay 1 NO contact 250 V AC / 30 V DC @ 2A safe zone 32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2Auxiliary power 19...31.2 V DCPower loss approx. 3 WAmbient temperature range -20 °C...+60 °C Secure isolation EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each otherWorking voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, ATEX IECEX, FMATEX marking II 3 G ExnA nC IIC T4ATEX characteristic data U0 = 28 V DC I0 = 93 mA DC P0 = 650 mWType ACT20X-2SAI-2HAO-S | Manual Override | Manual "functional safety" |
| Engineering Data | EPLAN | Firmware Version | ACT20X, EX signal isolating converter, 2-channel version |
| Other Specifications | < 2 V | ||
Environmental
| Operate Time | 135 Years | ET (Volt-Time) | EC002479 |
| Humidity Range | 0...95 % (no condensation) | Ingress Protection | 27-21-01-07 |
| Operating Temperature | -20 °C...60 °C | Temperature Coefficient | < 0.01% of span/°C (TU) |