点击放大查看
8965440000
| Manufacturer | |
| Description | SIGNAL CONVERTER/DISCONNECTOR Weidmuller ACT20X 模拟到模拟 信号调节器, IECEx 认证, 模拟输入, USB 电缆接口, 19.2 → 31.2 V 电源电压 |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Package | 1 | ||
Compliance
| RoHS | Lead free / RoHS Compliant | IEC 61000-4-2 | DIN EN 61326, NE 21 |
| Qualification | 11ATEX0131X.pdf | Approval Agency | CE，cUL，EAC，Ex，GOSTEX，RoHS，TUV |
| Safety Category | SIL 2, SIL 3 on use of 2 devices with special wiring | Standard Number | 30-21-18-01 |
| Protection Features | IP20 | Declaration of Conformity | Declaration of Conformity |
Electrical
| Sensor | ≤ 28 V DC | Current | Current loop 93 mA / externally 10 mA |
| Voltage | Current loop 28 V / externally 10 V | Accuracy | < 0.1% span |
| Frequency | 27-21-01-07 | Tolerance | 5 Years |
| Input Type | 模拟 | Resistance | ≤ (Vs - 3.5 V) / 23 mA (current loop) |
| Input Range | 4 → 20 mA | Output Type | 模拟 |
| Power - Max | Current loop 0.65 W / externally 0.1 W | Range deg/s | 0.5 mm² |
| Current - UL | E337701.pdf | Load Current | ≤ 600 Ω |
| Current - IEC | IECEx certification | Output Signal | < 28 mA |
| Power - Rated | ≤ 62.5 VA / 32 W (safe area)≤ 16 VA / 32 W (Zone 2) | Response Time | ≤ 5 ms |
| Current - Test | ≤ 0.5 A AC / 0.3 A DC (safe zone), ≤ 0.5 A AC / 1 A DC ( Zone 2) | Regulator Type | 模拟到模拟 |
| Voltage Rating | 300 V | Current - Output | 4...20 mA |
| Voltage - Supply | ≤ 26 V DC | Switching Voltage | ≤ 125 V AC / 110 V DC (safe area)≤ 32 V AC / 32 V DC (Zone 2) |
| Number of Channels | 2 | Resistance - Input | ≤ 0.01% of span / 100 Ω |
| Frequency Stability | ≤ 0.01 % of end value / 100 Ω | Voltage - Breakdown | 2.6 kV (input / output) |
| Current - Input Bias | 4...20 mA | Frequency - Output 3 | 0.5…2.5 kHz @ 3.5…23 mA bi-directional HART® signal |
| Power - Average Forward | ≤ 3 W (2 channels) | VoP, Velocity of Propagation | 4.1 x 10-8 h-1 |
| Ripple Current @ Low Frequency | < 7.5 mVeff | ||
Mechanical
| Depth | 113.6 mm | Taper | SIL certificate |
| Width | 22.5 mm | Height | 117.2 mm |
| Weight | 212 g | Termination | 螺钉 |
| Torque - Min | 0.4 Nm | Mounting Type | DIN 导轨 |
| Connector Type | Screw connection, Removable terminal block | Depth (Inches) | 4.472 inch |
| Width (Inches) | 0.886 inch | Connector Usage | USB 电缆 |
| Height (Inches) | 4.614 inch | Package Quantity | instruction sheet.pdf |
| Torque - Max Momentary (oz-in / mNm) | 0.6 Nm | ||
Product Info
| Type | Relay, 1 NC (voltage-free) | Series | * |
| ETIM 6*0 | EC002479 | Features | 集成警报触点在发生故障时发出警报 |
| Software | WI-Manager + DTM-Library for online installation | GTIN (EAN) | 4032248785056 |
| Configuration | With FDT/DTM software | Legend (Text) | CBX200 USB configuration adapter - 8978580000 |
| Specifications | Ex supply isolator for standard DC current signals, 2-channel, HART transparent2-channel supply isolator in 22.5 mm width with external power supply,for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safezones. This component has active and passive inputs. External sensors can be supplied with > 15 VDC. The 4...20 mA output circuit can be operated either passively or actively. Status and error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.Add-on housing for TS35 rail mountingDimensions: L/W/H 119.2/ 22.5/ 113.6Screw connection/ Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 2 x 4...20 mA > 15 V DC sensor supply Output active 2 x 4...20 mA passive 2 x 4...20 mA current loop max. 26 V DCLoad < 600 OhmAccuracy < 0,1 % v.ETemperature coefficient < 0,01% v.E./°C (Tu) Alarm output relay 1 NO contact 250 V AC / 30 V DC @ 2A safe zone 32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2Auxiliary power 19...31.2 V DCPower loss approx. 3 WAmbient temperature range -20 °C...+60 °CSecure isolation EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each otherWorking voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, ATEX IECEX, FMATEX marking II 3 G ExnA nC IIC T4ATEX characteristic data U0 = 28 V DC I0 = 93 mA DC P0 = 650 mWType ACT20X-2HAI-2SAO-S | Manual Override | Manual "functional safety" |
| Engineering Data | EPLAN | Firmware Version | ACT20X, EX signal isolating converter, 2-channel version |
Environmental
| Operate Time | 315 Years | ET (Volt-Time) | EC002479 |
| Humidity Range | 0...95 % (no condensation) | Ingress Protection | 27-21-01-07 |
| Operating Temperature | -20 °C...60 °C | Temperature Coefficient | < 0.01% of span/°C (TU) |