点击放大查看
8705640000
| Manufacturer | |
| Description | VOLTAGE MONITORING |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Pack | 1 | Standard Package | 1 |
Compliance
| RoHS | Lead free / RoHS Compliant | Standards | DIN EN 50178 |
| IEC 61000-4-2 | EN 55011, EN 61000-6, EN 61326 | Standard Number | 30-21-18-01 |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Accuracy | < 0.3 % of set range | Frequency | 27-37-18-01 |
| Indicator | LED green = OK / LED yellow/red = alarm status | Isolation | 3-way isolator |
| Hysteresis | 24...70 V AC, small = 5 V / large = 10 V, 70–260 VAC, small = 8 V ⁄ large = 16 | Range deg/s | 0.5 mm² |
| Response Time | < 300 ms | Settling Time | DIP switches: ON = 1,2,5,8 / OFF = 3,4,6,7 |
| Voltage - Max | 260 V AC / DC | Current - Test | 3 A |
| Voltage Rating | input/output, input/reset input, reset input/output: 300 V | Voltage - Supply | from the measuring circuit |
| Current - Switching | 8 A | Voltage - Breakdown | 2 kVeff |
| Voltage - Input (Min) | 18 V DC | Voltage - Switching AC | 250 V |
| Impulse Discharge Current (8/20us) | Input/output, input/reset input, reset input/output: 4 kV | ||
Mechanical
| Depth | 112.4 mm | Width | 17.5 mm |
| Length | 96.5 mm | Weight | 132 g |
| Connector Type | Screw connection | Depth (Inches) | 4.425 inch |
| Mounting Rails | TS 35 | Width (Inches) | 0.689 inch |
| Length (Inches) | 3.799 inch | Package Quantity | instruction sheet.pdf |
Product Info
| Type | WAS5 VMR 1ph | Series | * |
| ETIM 6*0 | EC002046 | Function | Single-phase monitoring |
| GTIN (EAN) | 4032248377084 | Description | Markers – refer to Accessories. |
| Configuration | DIP switch, Potentiometer, Alarm status reset via reset input or button | Specifications | Limit-value monitoring component for 1-phase AC / DC voltages with relay output and electrical isolationlimit-value monitoring component in 17.5 mm width for recording AC / DC voltages 24...70 V / 70...140 V / 140...210 V / 210...260 V. A relay contact (CO) with a switching capacity of 750 VA is available on the output side. Input ranges, high/low trip switching behaviour, hysteresis and memory behaviour can be configured using DIP switches. Switching threshold can be adjusted using the front-side potentiometer. The input circuit is used for the power supply. The memory function can be activated using an external reset input 18...30 VDC. The input/output/reset have 4 kV of electrical isolation. |
| Firmware Version | WAVESERIES, Voltage monitoring, Screw connection | Other Specifications | III |
Environmental
| Distance | ≥ 3 mm | ET (Volt-Time) | EC001438 |
| Operational Life | 587 Years | Ingress Protection | 2 |
| Operating Temperature | -10 °C...55 °C | Temperature Coefficient | ≤ 250 ppm/K |