点击放大查看
8705630000
| Manufacturer | |
| Description | VOLTAGE MONITORING |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Package | 1 | ||
Compliance
| RoHS | Lead free / RoHS Compliant | Standards | DIN EN 50178 |
| IEC 61000-4-2 | EN 55011, EN 61000-6, EN 61326 | Standard Number | 30-21-18-01 |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Accuracy | < 0.3 % of set range | Frequency | 27-37-18-01 |
| Indicator | Green LED | Isolation | 3-way isolator |
| Hysteresis | 5% of final value | Range deg/s | 0.5 mm² |
| Response Time | < 300 ms | Settling Time | DIP switches: ON = 1,2,4 / OFF = 3 |
| Current - Test | 3 A | Voltage Rating | 600 V |
| Number of Inputs | 5 | Voltage - Supply | from the measuring circuit |
| Voltage - Breakdown | 4 kVeff / 1 min. | Voltage - Input (Min) | 250 V AC |
| Voltage - Switching AC | 250 V | Impulse Discharge Current (8/20us) | 6 kV |
Mechanical
| Depth | 112.4 mm | Width | 22.5 mm |
| Length | 96.5 mm | Weight | 120.6 g |
| Connector Type | Screw connection | Depth (Inches) | 4.425 inch |
| Mounting Rails | TS 35 | Width (Inches) | 0.886 inch |
| Length (Inches) | 3.799 inch | Package Quantity | instruction sheet.pdf |
Product Info
| Type | WAS2 VMR 3ph | Series | * |
| ETIM 6*0 | EC002046 | Function | 1-/3-phase monitoring |
| GTIN (EAN) | 4032248377060 | Description | Markers – refer to Accessories. |
| Configuration | DIP switch, Potentiometer, Alarm status reset via reset input or button | Specifications | Limit-value monitoring component for 1- /3- phase AC and DC voltageswith relay output and electrical isolationlimit-value monitoring component in 22.5 mm width for recording 1-phaseAC/DC voltages 200...400 V or 3-phase AC- voltages of 80...250 V.A relay contact (CO) with a switching capacity of 750 VAis available on the output side.Input ranges, high/low trip alarm, monitored voltage window andswitching behaviour (for working and quiescent currents) can be configured using DIP switchesSwitching threshold can be adjusted with front-side potentiometerPower is supplied via the measured circuit. The I/O circuits have 6 kV of electrical isolation.Add-on housing for TS35 rail mountingDimensions: L/W/H 96.5/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 3 phases 80 V...250 V AC 1 phase 200...400 V AC/DC switchableVoltage of measuring circuit max 400 VOutput Relay / COSwitching current 3 ASwitching voltage 6... 250 V AC / 6...60 V DCSwitching threshold via potentiometerVoltage window small 10 % AC / 20 % DC // large 12 % AC / 25 % DC adjustableHysteresis 5 % AC / 6 % DC of inputTemperature coefficient < 300 ppm KStep response time < 300 msAmbient temperature range 0 °C...+50 °C Secure isolation EN 50178, 2-way isolation up to 6 kVTest voltage 4 kVeff / 1 min. Input / OutputRated voltage 600 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType WA5 VMR 3ph |
| Firmware Version | WAVESERIES, Voltage monitoring, 5, 250 V, Screw connection | Other Specifications | III |
Environmental
| Distance | Output circuit: 1.8 mm; input circuit, output circuit 1/output circuit 2: 3 mm; input/output: 5.5 mm | ET (Volt-Time) | EC001438 |
| Operational Life | 493 Years | Ingress Protection | 2 |
| Operating Temperature | 0 °C...50 °C | Temperature Coefficient | ≤ 300 ppm/K |