点击放大查看
8444950000
| Manufacturer | |
| Description | Input Current Loop Feed 12-Pin CONDITIONER SIGNAL ANALOG 0-20MA DIN Rail 接口继电器模块, 0 → 20 mA, 4 → 20 mA |
| Category |
对参数有疑问？问 AI 助手
Business
| Other Names | WAS5 CCC LP I/I SC 1 | Standard Package | Bulk |
Compliance
| RoHS | Lead free / RoHS Compliant | Standards | DIN EN 50178, DIN EN 61000-4-2 |
| IEC Standard | 27-21-01-20 | IEC 61000-4-2 | EN 55011, EN 61000-6 |
| Approval Agency | C1D2, CE, CSA, CULus, EAC | Standard Number | 31-12-10-07 |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Current | < 100 µA | Accuracy | < 0.1 % of end value |
| Frequency | 27-21-01-20 | Isolation | Passive isolator |
| Range deg/s | 0.5 mm² | Load Current | ≤ 500 Ω |
| Voltage Rating | 300 V | Current - Output | 0...20 mA, 4...20 mA |
| Number of Inputs | 1 | Voltage - Supply | via the input measuring circuit |
| Number of Outputs | 1 | Voltage - Breakdown | 4 kVeff / 1 s |
| Current - Input Bias | 0(4)...20 mA current loop | Current Rating (Max) | 0 → 20 mA, 4 → 20 mA |
| Ratio - Input:Output | 0(4)...20 mA/0(4)...20 mA (1-channel) | Voltage - Input (Min) | 4 kVeff / 1 min. |
| Current - Input Bias (Max) | 0 → 20mA | Impulse Discharge Current (8/20us) | 6 kV |
Mechanical
| Depth | 112.4 mm | Width | 17.5 mm |
| Height | 17.5mm | Length | 92.4 mm |
| Weight | 125 g | Torque - Min | 0.4 Nm |
| Mounting Type | DIN Rail | Connector Type | Screw connection |
| Depth (Inches) | 4.425 inch | Mounting Rails | TS 35 |
| Width (Inches) | 0.689 inch | Length (Inches) | 3.638 inch |
| Package Quantity | instruction sheet.pdf | Size / Dimension | 92.4 x 112.4 x 17.5mm |
| Stripping Length | 7 mm | Termination Style | 螺丝 |
| Torque - Max Momentary (oz-in / mNm) | 0.5 Nm | ||
Product Info
| Type | WAS5 CCC LP 0-20/0-20mA | Series | * |
| ETIM 6*0 | EC002653 | GTIN (EAN) | 4032248102099 |
| Description | Markers – refer to Accessories. | Configuration | none |
| Specifications | Standard signal passive isolator, input-loop powered1channel passive isolator in 17.5 mm with, input-loop powered,for transmitting and isolating DC current signals 0/4...20 mAAdd-on housing for TS35 DIN rail installationDimensions: L/B/H 92.4/ 17.5/ 112.4 mmScrew connection/ Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mAVoltage drop approx. 3 V at RL 0 Ohm, 13 V at RL = 500 Ohm (20 mA)Load resistance < 500 OhmTransmission error < 0,1 % v. E.Auxiliary power 0/4...20 mA input current loopAmbient temperature range -25 °C...+70 °C Isolation EN 50178 , 2-way isolation up to 4 kV AC/DCTest voltage 6 kVRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX, CSA, GLType WAS5 CCC-LP 0-20/0-20mA | Engineering Data | EPLAN |
| Firmware Version | Passive isolator, Screw connection | Other Specifications | Approx. 3 V at RL = 0 Ω; approx. 13 V at RL = 500 Ω; (IIN =20 mA) |
Environmental
| Distance | ≥ 5.5 mm | ET (Volt-Time) | EC002653 |
| Operational Life | 2,097 Years | Ingress Protection | 2 |
| Operating Temperature | -25 to 70 °C | Temperature Coefficient | ≤ 50 ppm/K of final value |
Documents & Media
PDF Document