点击放大查看
1176050000
| Manufacturer | |
| Description | SIGNAL CONVERTER/DISCONNECTOR |
| Category |
对参数有疑问？问 AI 助手
Business
| Standard Package | 1 | ||
Compliance
| RoHS | Conform | Standards | IEC 61010-1 |
| IEC Standard | 27-21-01-20 | IEC 61000-4-2 | IEC 61326-1, NE 21 |
| Safety Category | KEMA10ATEX0183X | Approval Agency Marking | IECEXKEM10.0090X |
| Declaration of Conformity | Declaration of Conformity | ||
Electrical
| Sensor | Current source | Accuracy | < 0.05 % of measuring range |
| Frequency | 100 Hz | Isolation | 2-way isolator |
| Range deg/s | 0.5 mm² | Current - UL | E337701.pdf |
| Load Current | ≤ 600 Ω (channel 1 +2), @ max 23mA | Response Time | ≤ 5 ms |
| Voltage Rating | 300 Veff | Current - Output | 4...20 mA |
| Voltage - Supply | Output loop powered | Number of Outputs | 2 |
| Voltage - Breakdown | 2.5 kVeff / 1 min. | Current - Input Bias | 4...20 mA |
| Frequency - Output 3 | 100 Hz | Voltage - Input (Min) | Typical 2.5 V |
| No Load Power Consumption | 30 mW per channel | ||
Mechanical
| Depth | 114.3 mm | Width | 6.1 mm |
| Height | 112.5 mm | Weight | 96 g |
| Wire Gauge | 2.5 mm² | Connector Type | Screw connection |
| Depth (Inches) | 4.5 inch | Mounting Rails | TS 35 |
| Width (Inches) | 0.24 inch | Height (Inches) | 4.429 inch |
| Package Quantity | instruction sheet.pdf | ||
Product Info
| Type | ACT20M-2CI-2CO-OLP-S | Series | * |
| ETIM 6*0 | EC002653 | GTIN (EAN) | 4032248969999 |
| Description | DIN mounting rail, see Accessories | Product Type | The passive isolator ACT20M-CI-CO-OLP-S isolates standard analogue current signals. An analogue input current signal is linearly converted into an analogue output current signal and galvanically isolated. Power is supplied through the output measurement circuit (output loop-powered). The passive isolator ACT20M-2CI-2CO-OLP-S offers the same functionality, but has two galvanically isolated channels.. |
| Configuration | none | Specifications | Standard signal isolating amplifier2-channel signal isolating amplifier in 6.1 mm width output-loop powered,for transmitting and isolating analogue DC current signals 0/4...20 mA.Add-on housing for TS35 rail mountingDimensions: L/W/H 114.3/ 6.1/ 112.5 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0/4...20 mAOutput 0/4...20 mALoad resistance < 600 OhmTransmission error < 0,1 % v. E. Limit frequency 100 HzAuxiliary power 0/4...20 mA output current loop Power loss approx. 1.2 W Ambient temperature range -25 °C...+70 °C Isolation EN 61010-1, 2-way isolation up to 2.5 kV AC/DCTest voltage 2.5 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, FM Div2, ATEX Zone2, DNV, GLType ACT20M-2CI-2CO-OLP-S |
| Engineering Data | EPLAN | Firmware Version | Signal converter/insulator, dual channel, Output current loop powered, 2-way isolator, Output loop powered |
| Other Specifications | Typical 2.5 V | Descriptive Text Technical Data | Power supply optionally over the DIN mounting rail CH20M |
Environmental
| Temperature | -25 °C...+70 °C | ET (Volt-Time) | EC002479 |
| Humidity Range | 40 °C / 93 % rel. humidity, no condensation | Ingress Protection | 2 |
| Operating Temperature | -25 °C...70 °C | Temperature Coefficient | ≤± 0.07 µA x (Δ °C x V supply) @ Tamb < 25 °C, ≤±0.02 µA x (Δ °C x V supply) @ Tamb > 25 °C |