XACB281
| Manufacturer | |
| Description | Cable Boots PENDANT STATION 600VAC 10A XAC Schneider Electric component XACB281: pendant control station XAC-B - 2 pushbuttons |
| Category |
对参数有疑问？问 AI 助手
Compliance
| Standards | CSA C22-2 No 14EN/IEC 60204-32EN/IEC 60947-5-1UL 508 | Protection | Class II |
| Certification | CSA 300V type 4 | ||
Electrical
| Resistance | <= 25 MOhm | Power - Rated | 100 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V 50/60 Hz, load factor = 0.5 (inductive load)450 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 127 V 50/60 Hz, load factor = 0.5 (inductive load)50 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V 50/60 Hz, load factor = 0.5 (inductive load)750 VA AC-15 for 1000000 cycles, operating rate = 60 cyc/mn at 230 V 50/60 Hz, load factor = 0.5 (inductive load) |
| Voltage Rating | 500 V (degree of pollution: 3) conforming to IEC 60947-1 | Circuit Pattern | Control circuit |
| Power (Watts) - Max | 140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C140 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C95 W DC-13 for 1000000 cycles, operating rate = 60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C | Connector - Voltage Input | (1-2-3-4)OC |
| Voltage - Breakdown (V(BR)GSS) | 6 kV conforming to IEC 60947-1 | Current - Short Circuit Rating (SCCR) | 10 A fuse protection by cartridge fuse type gG |
Mechanical
| Weight | 0.85 kg | Contact End | XESB2011 for reversing operation |
| 1st Connector | Screw clamp terminals, connection capacity: 1 x 2.5 mm ² with or without cable endScrew clamp terminals, connection capacity: 2 x 1.5 mm ² with or without cable end | Terminal Type | (11-12)NC(13-14)NO |
| Contact Finish | A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A | Contact Timing | Snap action |
| Operating Force | 7 N for pushbutton | Plug Wire Entry | Rubber sleeve with stepped entry, cable outer diameter: 10...22 mm |
| Exterior Housing Material | Glass reinforced polyester | ||
Product Info
| Composition | 2 pushbuttons | Applications | Control of single speed hoist motor |
| Encoder Type | Complete ready for use | Product Type | Pendant control station |
| Measuring Range | Harmony XAC | Control / Drive Type | First pushbutton raise, slowSecond pushbutton lower, slow |
| Control Side Connection | Yellow | ||
Environmental
| Mechanical Life | Without mechanical interlock | Shock Resistance | 100 gn conforming to IEC 60068-2-27 |
| Storage Interface | -40...70 °C | Ingress Protection | IP65 conforming to IEC 60529 |
| Protective Treatment | TH | Vibration Resistance | 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6 |
| Operating Temperature | -25...70 °C | Thermal Current (Ith) | 10 A |