点击放大查看
NSYCVF165M48DPF
| Manufacturer | |
| Description | Filterfan 165m3/h 48VDC IP54 Schneider Electric component NSYCVF165M48DPF: ClimaSys forced vent. IP54, 165m3/h, 48V DC, with outlet grille and filter G2 |
| Category |
对参数有疑问？问 AI 助手
Electrical
| Noise | 50...51 dB | Filter Type | Standard |
| Power - Rated | 8.7 W 50 Hz | Voltage Rating | 48 V DC 50/60 Hz |
| Voltage - Supply | 25...55.2 V | Current Rating (Max) | 0.18 A 50 Hz |
Mechanical
| Color | Outlet grille: grey RAL 7035 | Depth | External: 104 mm |
| Width | External: 248 mm | Height | External: 268 mm |
| Weight | 0.81 kg | Air Flow | Free flow rate with standard filter: 190 m3/h at 50 Hz |
| Material | Injected thermoplastic (ASA PC) for outlet grille | Bearing Type | Ball |
| Connector Type | Faston connector | Maximum Pressure | 50 Pa flow rate 0 m ³/h |
| Panel Cutout Dimensions | 223 x 223 mm | ||
Product Info
| Composition | 1 outlet grille front1 axial motor2 protective grille on the front and rear surfaces1 filter front of axial motor1 cut-out template1 power cord | Product Type | Fan |
| Measuring Range | ClimaSys CV | ||
Environmental
| Test Condition | Outside temperature must be 5 °C lower than inside temperatureFilter must be cleaned and replaced regularlySurrounding environment must be relatively cleanOverfrequent filter replacement should be avoidedFlow rates depends on the work point, see ProClima software | Storage Interface | -40...70 °C |
| Ingress Protection | IP54 | Operating Temperature | -10...70 °C |