点击放大查看
TR-61621
| Manufacturer | |
| Description | Relay;OffDelay;10A;0.1sec.to2hrs.;240VAC Time Delay Relay Time Ranger Programmable Multi-Range Type:Single Knob Unit Function: Off Delay Cntl Switch Trigger Input Voltage: 240 VAC Timing Range: 0.1 sec - 120 min Mounting : Plug-in 11 Pin Round Contact Configuration: DPDT |
| Category |
对参数有疑问？问 AI 助手
Electrical
| Load | 2 VA | Accuracy | > 2 Seconds Delay +0.1% 0.1 - 2 Seconds Delay +2% |
| Reset Time | On Delay/Interval/Repeat Cycle/Delayed Interval: 0.1 Seconds, Off Delay/Single Shot/Watchdog/Triggered Delayed Interval: 0.04 Seconds | Timer Type | OffDelay |
| Range deg/s | 0.1 sec - 120 min | Voltage Rating | 240 VAC |
| Current - Output | 10 Amp | Voltage - Supply | AC Operation: +10/-15% of nominal at 50/60 Hz. DC Operation: +10/-15% of nominal. |
| Current Rating (Max) | 10A | Contact Voltage (Max) | 2,000 volts |
| Voltage - Input (Min) | 240VAC | ||
Mechanical
| Contact Form | DPDT | Mounting Type | 11 Pin Octal |
| Mounting Style | Socket | Number of Pins | 11 |
| Number of Contacts | DPDT 10A @ 240V AC/28V DC, 1/2HP @ 240V AC, 1/3HP @ 120V AC B300 & R300; AC15 & DC13 | Contact Layout, Typical | 2C DPDT |
| Operating Force - Initial | (Time from when power is applied until unit is timing) 120 & 240V units 0.05 Seconds 12, 24 & 48V units 0.08 Seconds | ||
Product Info
| Type | Single Knob Unit | Function | Timing |
| Relay Type | ElectroMechanical | Trigger Type | Timing sequence must be initiated only after input voltage is applied to unit. Minimum required trigger switch closure time is 0.1 seconds. |
| Card Standard | Delay on Break | Compatibility | On all units triggered by input voltage or by a control switch, do not use a solid state switch to initiate the timing sequenceproblems with leakage current could occur. On all units with a power trigger, do not use a solid state switch with leakage curre |
Environmental
| Temperature | 12-120V Input Voltage: -28° to 65°C (-18° to 150°F) 240V Input Voltage: -28° to 50°C (-18° to 122°F) | Operate Time | (Time unit continues to time after power is removed) 0.01 Seconds for all units |
| Mechanical Life | Mechanical: 10,000,000 operations Full Load: 100,000 operations | ||