点击放大查看
PCP2
| Manufacturer | |
| Description | Relay;E-Mech;PhaseMonitor;SPDT;Cur-Rtg10A;Ctrl-V208-480V;Vol-Rtg240AC;8Pin Phase Monitor Relay Type: Phase Reversal Only NOMINAL VOLTAGE 50/60 Hz: 208-480V Contact Configuration: SPDT Mounting: 8 Pin Plug-in Contact Current: 10 Amps |
| Category |
对参数有疑问？问 AI 助手
Compliance
| Standards | cULus,UL | Protection | 10,000 volts for 20 microseconds |
Electrical
| Load | 3VA | Reset | Automatic upon correction of fault |
| Indicator | Red LED on when all conditions are normal, and off when a fault condition has occurred | Return Loss | n/a |
| Display Type | IndicatorLED | Release Time | 50ms |
| Response Time | Operate: 50ms, Release: 50ms | Voltage Rating | 240VAC |
| Current - Output | 10 Amp | Voltage - Supply | 208-480 V |
| Current Rating (Max) | 10A | Voltage - Peak Reverse (Max) | Unit trips if sequence of the three phases is anything other than A-B-C. |
| Drive Voltage (Max Rds On, Min Rds On) | 480V | ||
Mechanical
| Termination | Plug-In | Contact Form | SPDT |
| Mounting Type | Uses an 8 pin octal socket. Requires a 600V-rated socket when used on system voltages greater than 300V (Macromatic Product Number 70169-D--see Page 16 of Catalog). | Mounting Style | Socket |
| Number of Pins | 8 | Number of Contacts | 10A SPDT @ 240V AC, 1/3HP @ 240V AC (N.O.), 1/6HP @ 240V AC (N.C.) |
| Contact Layout, Typical | 1C SPDT | ||
Product Info
| Type | Monitors | Function | PhaseMonitor |
| Relay Type | ElectroMechanical | Manufacturer | PCBSeries |
| Card Standard | Phase Monitor Relay | ||
Environmental
| Temperature | -28° to 65°C (-20° to 150°F) | Mechanical Life | Full Load: 100,000 operations |
| Operating Temperature | -20to+60°C | ||