ONEIC.US

TLV1117-33CDCYalternatives & cross reference

64 Chinese-brand replacement candidates for TLV1117-33CDCY (Texas Instruments) in Power management — each labeled with its verification level and parameter differences. Shenzhen sourcing, quote in 24 hours.

A1117-3.3

IDCHIP · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYA1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.2V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C8435863 lists A1117-3.3 as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
A1117-3.3(SOT-223)

ALJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYA1117-3.3(SOT-223)Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.15V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)0℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度94%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C59149118 lists A1117-3.3(SOT-223) as a domestic alternative with 相似度94%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AF1117A-33L

AF · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAF1117A-33LEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(10kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C54491454 lists AF1117A-33L as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AiP1117-3.3GH.TR

I-CORE · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAiP1117-3.3GH.TREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度97%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3325963 lists AiP1117-3.3GH.TR as a domestic alternative with 相似度97%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

ALJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V20VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)50dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.15V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度86%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C24132009 lists AMS1117-3.3 as a domestic alternative with 相似度86%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

GOODWORK · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)70dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA3mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度92%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C7008096 lists AMS1117-3.3 as a domestic alternative with 相似度92%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

GR · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.2V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Temperature range0℃~+125℃@(Tj)0℃~+150℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度93%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C19305548 lists AMS1117-3.3 as a domestic alternative with 相似度93%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

HEERMICR · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5884674 lists AMS1117-3.3 as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

JSMSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度94%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C991679 lists AMS1117-3.3 as a domestic alternative with 相似度94%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

KEXIN · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA8mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%封装相同This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C343670 lists AMS1117-3.3 as a domestic alternative with 相似度83%封装相同. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

Slkor · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Power-supply rejection ratio75dB@(120Hz)70dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(0.8A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA3mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度92%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C420485 lists AMS1117-3.3 as a domestic alternative with 相似度92%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

YONGYUTAI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout0.005%VoutLCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3119758 lists AMS1117-3.3 as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3

国芯佳品 · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3Engineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA4mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度87%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3457622 lists AMS1117-3.3 as a domestic alternative with 相似度87%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3 (AT)

AOTE · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3 (AT)Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA4mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度87%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C58419473 lists AMS1117-3.3 (AT) as a domestic alternative with 相似度87%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3(LX)

LX · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3(LX)Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)72dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.65V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C26561628 lists AMS1117-3.3(LX) as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3/TR

HGSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3/TREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V12VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Dropout voltage1.3V@(800mA)1.2V@(800mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度81%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C24141308 lists AMS1117-3.3/TR as a domestic alternative with 相似度81%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3RG

HGC · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3RGEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度92%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3386138 lists AMS1117-3.3RG as a domestic alternative with 相似度92%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3V

JSMSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.2AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.5V@(800mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5896504 lists AMS1117-3.3V as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AMS1117-3.3V

TDD · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAMS1117-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.2AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C59477654 lists AMS1117-3.3V as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
ASPL1117-3.3-DT-R

ASDsemi · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYASPL1117-3.3-DT-REngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V24VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA900mAVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)65dB@(100Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(0.9A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA28uACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C537408 lists ASPL1117-3.3-DT-R as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
AT1117SR-3.3V

Agertech · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYAT1117SR-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA8mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5920690 lists AT1117SR-3.3V as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
CJT1117B-3.3

CJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYCJT1117B-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.3VVerify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护热关断;过流保护;短路保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度92%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C79914 lists CJT1117B-3.3 as a domestic alternative with 相似度92%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
CJT1117B-3.3-G

CJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYCJT1117B-3.3-GEngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.15V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护短路保护;热关断;过流保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度86%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C176281 lists CJT1117B-3.3-G as a domestic alternative with 相似度86%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
FSL1117-3.3

FOSAN · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYFSL1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.1V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C58887260 lists FSL1117-3.3 as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
GN1117-3.3V

GN · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYGN1117-3.3VEngineering note
PackageSOT-223-4SOT-223-3LLCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)72dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.45V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度89%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C8587773 lists GN1117-3.3V as a domestic alternative with 相似度89%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
GP2105-33L

GUQIAO · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYGP2105-33LEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)8mV@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C51337613 lists GP2105-33L as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
JTD1117A(1.4A)-3.3V

JTD · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYJTD1117A(1.4A)-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.4AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1.4A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44496672 lists JTD1117A(1.4A)-3.3V as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
JTD1117C(1A)-3.3V

JTD · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYJTD1117C(1A)-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44496677 lists JTD1117C(1A)-3.3V as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117-3.3

UMW · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护过流保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度87%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C323889 lists LD1117-3.3 as a domestic alternative with 相似度87%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117AG-3.3V-A

UTC · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117AG-3.3V-AEngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout100uVLCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度93%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C480864 lists LD1117AG-3.3V-A as a domestic alternative with 相似度93%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117AG-33-AA3-A-R

UTC · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117AG-33-AA3-A-REngineering note
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout100uVLCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度93%封装相同This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C72220 lists LD1117AG-33-AA3-A-R as a domestic alternative with 相似度93%封装相同. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117S33CTR-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117S33CTR-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397762 lists LD1117S33CTR-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117S33TR-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117S33TR-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397761 lists LD1117S33TR-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LD1117SG-3.3

BLUE ROCKET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLD1117SG-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA950mAVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.05V@(100mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-25℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度91%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C522882 lists LD1117SG-3.3 as a domestic alternative with 相似度91%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LM1117-3.3

R+O · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLM1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1000mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护短路保护;热关断;过流保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C59581758 lists LM1117-3.3 as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LM1117IMP-3.3/NOPB-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLM1117IMP-3.3/NOPB-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397757 lists LM1117IMP-3.3/NOPB-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LM1117IMP-3.3/TR

HGSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLM1117IMP-3.3/TREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.25V@(500mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度86%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5691702 lists LM1117IMP-3.3/TR as a domestic alternative with 相似度86%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LM1117IMPX-3.3/NOPB-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLM1117IMPX-3.3/NOPB-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397756 lists LM1117IMPX-3.3/NOPB-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LM1117MP-3.3/TR

HGSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLM1117MP-3.3/TREngineering note
PackageSOT-223-4SOT-223-3LLCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度92%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C510043 lists LM1117MP-3.3/TR as a domestic alternative with 相似度92%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LR1117-H33

LR · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLR1117-H33Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.1V@(500mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA1.7mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护过流保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C7349347 lists LR1117-H33 as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
LR1117DS33X

LRC · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYLR1117DS33XEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C356566 lists LR1117DS33X as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
MC33269MP-3.3/TR

HGSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYMC33269MP-3.3/TREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Dropout voltage1.3V@(800mA)1.2V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度91%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C48762216 lists MC33269MP-3.3/TR as a domestic alternative with 相似度91%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
ME1117A33B3G

MICRONE · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYME1117A33B3GEngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)65dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA3mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度86%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C95256 lists ME1117A33B3G as a domestic alternative with 相似度86%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
MS1117-3.3V

MSKSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYMS1117-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C49203793 lists MS1117-3.3V as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
PJ1117ST-3.3

PJSEMI · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYPJ1117ST-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.5V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C25107302 lists PJ1117ST-3.3 as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
QN1117-3.3V

QNHCHIP · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYQN1117-3.3VEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度88%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C52997451 lists QN1117-3.3V as a domestic alternative with 相似度88%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
REG1117-3.3-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYREG1117-3.3-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397751 lists REG1117-3.3-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SA1117BH-3.3TR

SILAN · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSA1117BH-3.3TREngineering note
PackageSOT-223-4SOT-223-3LLCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Dropout voltage1.3V@(800mA)-Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA-Check no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C630854 lists SA1117BH-3.3TR as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SCJT1117B-3.3

CJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSCJT1117B-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度88%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C1975546 lists SCJT1117B-3.3 as a domestic alternative with 相似度88%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SCJT1117B-3.3-A

CJ · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSCJT1117B-3.3-AEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.5V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断;过流保护;短路保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C2979412 lists SCJT1117B-3.3-A as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SGM2205-3.3XKC3G/TR

SGMICRO · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSGM2205-3.3XKC3G/TREngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V20VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Power-supply rejection ratio75dB@(120Hz)75dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)850mV@(800mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA112uACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护使能控制;短路保护;输出放电;过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5779418 lists SGM2205-3.3XKC3G/TR as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SGM2225-3.3XKC3G/TR

SGMICRO · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSGM2225-3.3XKC3G/TREngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V36VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Power-supply rejection ratio75dB@(120Hz)75dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)850mV@(800mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA112uACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护使能控制;短路保护;过流保护;噪声旁路端子;输出放电;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5779428 lists SGM2225-3.3XKC3G/TR as a domestic alternative with 相似度82%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SK6117-33LR

suntek · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSK6117-33LREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.4AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度88%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3433133 lists SK6117-33LR as a domestic alternative with 相似度88%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SK6117C-33LR

suntek · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSK6117C-33LREngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Power-supply rejection ratio75dB@(120Hz)70dBConfirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.2V@(800mA)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA3.5mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度86%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C54790227 lists SK6117C-33LR as a domestic alternative with 相似度86%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SL1117-3.3

Slkor · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSL1117-3.3Engineering note
PackageSOT-223-4SOT-223-3LLCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V18VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)70dBConfirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.4V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA10mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度83%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C35695889 lists SL1117-3.3 as a domestic alternative with 相似度83%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SP1117V33TC

Siliup · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSP1117V33TCEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.4AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)68dB@(1kHz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C43089604 lists SP1117V33TC as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
SSP1117-3.3V

Siproin · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYSSP1117-3.3VEngineering note
PackageSOT-223-4SOT-223-3LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V20VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C265162 lists SSP1117-3.3V as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
TLV1117-33IDCYR-HXY

HXY MOSFET · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYTLV1117-33IDCYR-HXYEngineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C44397749 lists TLV1117-33IDCYR-HXY as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
TS1117BCW33

Taiwan Semiconductor · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYTS1117BCW33Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)60dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度88%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C22109440 lists TS1117BCW33 as a domestic alternative with 相似度88%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
U1117-3.3V-SOT223

UNI-SEMIC · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYU1117-3.3V-SOT223Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.4AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-20℃~+85℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C24012230 lists U1117-3.3V-SOT223 as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
WD1117-3.3(1.35A)

WD · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYWD1117-3.3(1.35A)Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1.35AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)70dB@(120Hz)Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Quiescent current5mA6mACheck no-load and enabled-state current against the application power budget.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度89%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C5830137 lists WD1117-3.3(1.35A) as a domestic alternative with 相似度89%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
XBL1117-3.3

XBLW · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYXBL1117-3.3Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA4mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护热关断;过流保护;短路保护Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Ta)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度87%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C49205943 lists XBL1117-3.3 as a domestic alternative with 相似度87%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
ZD1117ILTR33

Zetta · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYZD1117ILTR33Engineering note
Maximum operating voltage15V16VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.5V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度82%封装相同This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C3261300 lists ZD1117ILTR33 as a domestic alternative with 相似度82%封装相同. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ
ZD1117ILTR331

Zetta · Power management

Third-party reference · unverifiedCurated list
Parametric matchRe-design neededUpdated 2026-11-02Vendor document
ParameterTLV1117-33CDCYZD1117ILTR331Engineering note
PackageSOT-223-4SOT-223LCSC page package designation; same or similar labels do not establish pinout or land-pattern compatibility.
Maximum operating voltage15V16VCompare absolute maximum input, recommended operating range and transient margin against both manufacturer datasheets.
Output current800mA1AVerify load, thermal derating, SOA and short-circuit behavior for the exact target order code.
Power-supply rejection ratio75dB@(120Hz)-Confirm test frequency, load and input-output conditions; values with different test conditions are not directly interchangeable.
Dropout voltage1.3V@(800mA)1.3V@(1A)Verify test current and minimum guaranteed headroom at the required load and temperature.
Quiescent current5mA2mACheck no-load and enabled-state current against the application power budget.
Output noise0.003%Vout-LCSC may publish percentage-of-Vout or absolute noise with different bandwidth; compare the original test conditions.
Protection features热关断;过流保护过流保护;热关断Thermal, current-limit and short-circuit behavior must be checked for fault recovery and latch behavior.
Temperature range0℃~+125℃@(Tj)-40℃~+125℃@(Tj)Confirm whether the published limit is ambient, case or junction temperature and apply the required derating.
LCSC algorithmic similaritySource product C354504相似度85%This is LCSC’s third-party matching score, not an independently confirmed pin-to-pin or application qualification.

LCSC cross-reference item C8495023 lists ZD1117ILTR331 as a domestic alternative with 相似度85%. Parameters and availability shown are a 2026-11-02 third-party snapshot and have not been independently verified in this import. Confirm the exact order code, pinout, footprint, stability/ESR, transient response, thermal design and qualification from both original datasheets before production use.

View on ONEICShenzhen sourcing · price & lead time by RFQ

Related cross-references

Disclaimer

Cross-reference suggestions for TLV1117-33CDCY are provided for engineering convenience and are based on published specifications, vendor documents, or parametric analysis as labeled on each entry. They do not constitute an endorsement by, or an affiliation with, Texas Instruments, and they are not a guarantee of suitability for any specific application. Always validate alternatives against both manufacturers' current datasheets and your own qualification process before production use.