ONEIC.US

STM32F103RCT6alternatives & cross reference

2 Chinese-brand replacement candidates for STM32F103RCT6 (STMicroelectronics) in MCU — each labeled with its verification level and parameter differences. Shenzhen sourcing, quote in 24 hours.

APM32F103RCT6

Geehy · MCU

VerifiedFAE reviewed
Pin-to-pinPin-compatibleUpdated 2026-10-30Vendor document
ParameterSTM32F103RCT6APM32F103RCT6Engineering note
Package and complete pin sequenceSTM32F103RCT6: LQFP64, 10 x 10 mmAPM32F103RCT6: LQFP64, 10 x 10 mm, tray SPQ 1600The exact order codes are both LQFP64. Table-based comparison confirmed identical main-function names on pins 1 through 64. PCB land-pattern, assembly, reel/tray handling and thermal design still require independent release checks.
SRAM48 KB64 KBThe target provides 16 KB more SRAM. Firmware memory maps, linker scripts, stack/heap placement and RAM initialization must be rebuilt for the target.
Maximum core frequency72 MHz96 MHzThe target has more clock headroom. Recalculate clocks, bus dividers, peripheral timing and Flash access timing before using a clock above the source design limit.
Operating supply and temperature2.0 V to 3.6 V; suffix 6 rated -40 C to +85 C2.0 V to 3.6 V; APM32F103RCT6 order table rated -40 C to +85 CThe reviewed exact-code supply and ambient ranges match. Do not substitute wider series-page temperature options into this exact order code.
Registers, peripherals and softwareSTM32F103 peripheral identifiers, registers, clock tree and firmware ecosystemGeehy APM32F103 peripheral identifiers, registers, clock tree and firmware ecosystemThe physical main-function pin sequence corresponds, but a firmware port, startup code, clock configuration, driver review and peripheral validation are still required.

FAE documentary review accepted for the exact STM32F103RCT6 and APM32F103RCT6 order codes. Both are 256 KB Flash, 51-GPIO, 2.0 V to 3.6 V LQFP64 Cortex-M3 MCUs, and the complete 64-pin main-function sequence matches. The target increases SRAM from 48 KB to 64 KB and maximum core frequency from 72 MHz to 96 MHz. The exact RCT6 order table confirms -40 C to +85 C. Pin correspondence does not establish register, clock, ADC, driver or software compatibility. Document review only; not bench, temperature-cycle, EMC, reliability or production qualified.

View on ONEICShenzhen sourcing · price & lead time by RFQ
GD32F103RCT6

GigaDevice · MCU

Parametric match · unverifiedCurated list
Pin-to-pinPin-compatibleUpdated 2026-09-28
ParameterSTM32F103RCT6GD32F103RCT6Engineering note
Max core frequency72 MHz108 MHz—
View on ONEICShenzhen sourcing · price & lead time by RFQ

Related cross-references

Disclaimer

Cross-reference suggestions for STM32F103RCT6 are provided for engineering convenience and are based on published specifications, vendor documents, or parametric analysis as labeled on each entry. They do not constitute an endorsement by, or an affiliation with, STMicroelectronics, and they are not a guarantee of suitability for any specific application. Always validate alternatives against both manufacturers' current datasheets and your own qualification process before production use.